Maintenance and service
12.5 Installing Software
SIMATIC Panel PC 877
12-36 Operating instructions, Release 07/2006, A5E00877780-01
12.5.5.2 Booting from the Recovery CD
Please use the Recovery CD to install Windows to meet your special requirements. The
operating system used is Windows Preinstall Environment (WinPE). You will also need the
supplied Documentation and Drivers CD.
Booting with the Recovery CD:
1. Insert the Recovery CD in the drive and reboot the device. When the BIOS message
”Press <F2> to enter Setup or <ESC> to show Boot Menu"
appears, press the ESC key. After initialization, a "Boot Menu" is displayed.
2. Select the optical drive with the cursor keys.
3. Please follow the on-screen instructions until the "Siemens SIMATIC Recovery" window
appears.
To Next Page
Loading...
