EasyManua.ls Logo

Siemens SIMATIC PANEL PC 877 - Page 242

Siemens SIMATIC PANEL PC 877
288 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Detailed descriptions
17.6 BIOS setup
SIMATIC Panel PC 877
17-50 Operating instructions, Release 07/2006, A5E00877780-01
Entry Meaning
On-chip USB A [Enabled] On-chip USB A determines the function of USB ports 0 and 1. On-
chip USB A occupies PCI IRQ Channel 1. On-chip USB A port 0 is
located on the front interface socket X44, port 1 on the bottom of the
device rear X36. Users cannot edit this value.
[Enabled] On-chip USB B determines the function of USB ports 2 and 3. On-
chip USB B occupies PCI IRQ Channel 2. On-chip USB B port 3 is
located on internal X2033. Port 2 is located on the bottom of the
device rear X36.
OnChip USB B
[Disabled] The interface is disabled, resources are released and can be used
otherwise.
[Enabled] On-chip USB C occupies PCI IRQ channel 3. On-chip USB C Port 5
is located at the front interface socket X2034.
On-chip USB C
[Disabled] The interface is disabled, resources are released and can be used
otherwise.
[Enabled] USB 2.0 is enabled for ports 0 to 5. OnChip USB 2.0 is allocated to
PCI IRQ channel 4.
Accessible are only the the USB ports 1 and 2 on the top/bottom of
the rear panel of the device, or USB 5 on the front panel.
On-chip USB
2.0
[Disabled] The USB interfaces on port 0 to 5 support only USB 1.1 and occupy
resources as described earlier.

Table of Contents

Related product manuals