Operation
10.3 Device with key panel
SIMATIC Panel PC 877
Operating instructions, Release 07/2006, A5E00877780-01
10-11
Example:
The keyboard codes, that are sent when any key is operated, are stored in a code table. The
initial status of the table is as follows:
Table 10-1 Keyboard codes
Keys: Keyboard code:
All standard PC keys "English international"
Additional keys for Panel PC 877
F13 - F20 SHIFT+F1 - SHIFT+F8
S1 - S4 SHIFT+F9 - SHIFT+F12
S5 - S16 CTRL+F1 - CTRL+F12
This default setting for additional function keys corresponds to the specifications required for
using the keys (for example, from the HMI software package SIMATIC WinCC flexible).
To Next Page
Loading...
