Step Action
8
● In the right window of the Process Object view, click the "Parameters" tab.
● Split the right window into two sections, as described in step 3 above. The left window
displays the "Chart" column and the right window displays the "I/O", "Category", and
"Value" columns.
● Click the "Chart" column title to sort the column in descending order.
● Enter the value 6 in the "Value" column in the right window for the chart name "VALVE1"
and I/O "MonTiDynamic" .
● Enter the value 6 in the "Value" column in the right window for the chart name "VALVE2"
and I/O "MonTiDynamic" .
Programming and interconnecting the process tags
7.1 How to program and interconnect the process tags
Getting Started (V8.1 with APL)
Getting Started, 07/2014, A5E32713210-AA 49
To Next Page
Loading...
