Siemens SIMATIC RF220R - Handling Application Error States

5 Operating the Application
Read/write data with IO-Link
Entry ID: 73565887, V3.4, 06/2022
31
© Siemens AG
2022 All rights reserved
5.4 Error states
An error while operating the application can have the following causes:
• no transponder in the reader field
• cancellation of the read function
The following table shows an example for such a situation.
Table 5-3
No.
Action
1.
In the input fields "Timer" and "Length" you enter (an "Offset" if desired) the values
relevant for writing the RFID data.
2.
No transponder in the reader field.
3.
Click on the "WRITE" button.