Siemens Simatic S7-1500 / ET 200MP - Page 35

Programming
5.1 Programming with STEP 7 (TIA Portal)
Technology module TM FAST (6ES7554-1AA00-0AB0)
34 Equipment Manual, 04/2023, A5E52301130-AA
Status parameter
Error codes or status information are output as word at the Status output.
Code
Meaning Remedy
(W#16#...)
0000
No error.
—
7000
No job in progress.
—
7001
Writing of data record 100 is not yet completed.
—
7002
Reading of data record 100 is not yet completed.
—
8001
The module specified at the HWID input parameter is not
a TM FAST.
Ensure that the hardware identifier of the
TM FAST is specified at the HWID input parame-
ter.
8002
8003
An error has occurred using a system function.
Make sure that the CPU can access the
TM FAST.
8004
8005