Siemens Simatic S7-1500 / ET 200MP - Page 55

Technical specifications
Technology module TM FAST (6ES7554-1AA00-0AB0)
54 Equipment Manual, 04/2023, A5E52301130-AA
Article number
6ES7554-1AA00-0AB0
SIMATIC S7-1500, TM FAST Field Adaptable
High-Speed Technology, programmable with
Intel(R) Quartus(R) Prime software, 8xDI, 8xDQ,
4xDIQ 24 V, 8xRS485 DIQ, for extremely short
response time of less than 1 µs
Diagnoses
• Monitoring the supply voltage
Yes
• Wire-break
Yes; for RS485/RS422/TTL Input
• Short-circuit
Yes; Thermal overload protection
• Group error
Yes
Diagnostics indication LED
• RUN LED
Yes; green LED
• ERROR LED
Yes; red LED
• MAINT LED
Yes; Yellow LED
• Monitoring of the supply voltage (PWR-LED)
Yes; green LED
• Channel status display
Yes; green LED
• for channel diagnostics
Yes; red LED
Potential separation
Potential separation channels
•
between the channels
No
•
between the channels and backplane bus
Yes
•
Between the channels and load voltage L+
No
Isolation
Isolation tested with
707 V DC (type test)
Ambient conditions
Ambient temperature during operation
•
horizontal installation, min.
-30 °C
•
horizontal installation, max.
60 °C
•
vertical installation, min.
-30 °C
•
vertical installation, max.
40 °C
Altitude during operation relating to sea level
• Installation altitude above sea level, max.
5 000 m; restrictions for installation altitudes >
2 000 m, see ET 200MP system manual
Decentralized operation
to SIMATIC S7-300
Yes
to SIMATIC S7-400
Yes
to SIMATIC S7-1200
Yes
to SIMATIC S7-1500
Yes
to standard PROFINET controller
Yes