Siemens SIMATIC TI505 Installation And Operation

S5 Adapter/CP 525 Error Codes
C-3
S5 UniLink Adapter Installation and Operation
C.2 CP 525 Error Codes
If the CP 525 module responds with an error code, it is returned in the
following 80DD word. The DD field will contain the CP 525 error code byte.
In order to determine the meaning of this error code, you must refer the
value DD to the appropriate CP 525 manual. These errors will have the
same response format as the primitive exception errors.
Table C-2 CP 525 Error Code
80DD An exception was generated by the CP 525 module, and its byte value
is contained in the DD field.
An example of a CP 525 error would be if you tried to access an undefined
data block. In this case, a value of 80DD would be returned, and the value
DD contains the value associated with the CP 525 error code saying that the
data block requested has not been defined.
Description of
CP 525 Error Codes
Example CP 525
Error Code

Siemens SIMATIC TI505 Specifications

General

Brand	Siemens
Model	SIMATIC TI505
Category	Control Unit
Language	English