4
4.2 Process data (PZD area)
4-120
E Siemens AG 2013 All Rights Reserved
SIMODRIVE POSMO A User Manual (POS1) – 08/2013 Edition
Note
The following conditions should be observed:
S Control word STW.4 has priority over STW.6
S Control words STW.4 and STW.6 have priority over STW.5
This means:
S If the drive brakes along the ramp, then when STW.4 is withdrawn,
the drive brakes with the maximum deceleration.
S If STW.5 = 0, STW.4 and STW.6 brake according to how they are
defined.
S If STW.5 is reset while braking, this does not mean that the speed
is kept constant.
4 Communications via PROFIBUS–DP
02.9905.03