Siemens SIMODRIVE POSMO A User Manual

5
5.6 Parameters for SIMODRIVE POSMO A
5-226
 Siemens AG 2013 All Rights Reserved
SIMODRIVE POSMO A User Manual (POS1) – 08/2013 Edition
P0918 / 396 PROFIBUS node address
300W 075W
Min Standard Max Unit Data type Effective
––––I2RO
The node address is read from address switch S1.
P0928 / 3A0 Control authority PZD
300W 075W
Min Standard Max Unit Data type Effective
1 1 2 – V2 immed.
Request for control authority from a Class 2 DP master.
Note:
Available from SW 1.4.
P0930 / 3A2 Actual operating mode
300W 075W
Min Standard Max Unit Data type Effective
––––I2RO
This parameter indicates the active operating mode.
P930 = 2 means: Positioning operating mode
software version 2.0 and higher: P930 = 1 means: Speed setpoint operating mode.
P0947 / 3B3 Faults
300W 075W
Min Standard Max Unit Data type Effective
––––I2RO
The parameter indicates, bit-coded, which faults are present.
Bit0 corresponds to Fault 700,
Bit1 corresponds to Fault 701, etc.
Note:
SimoCom A:
Read about possible faults in the online help:
Help ––> Help topics ––> Index ––> 700...715
User Manual:
The description of the faults, how they can be acknowledged as well as a list of all the faults is
provided in Section ”Fault handling and diagnostics”.
Refer to the index entry ”Faults”.
P0953 / 3B9 Warnings
300W 075W
Min Standard Max Unit Data type Effective
––––I2RO
The parameter indicates, bit-coded, which alarms are present.
Bit0 corresponds to Warning 800,
Bit1 corresponds to Warning 801, etc.
Note:
SimoCom A:
Read about possible warnings in the online help:
Help ––> Help topics ––> Index ––> 800...812
User Manual:
The description of the warnings, how they can be acknowledged as well as a list of all the war-
nings is provided in Section ”Fault handling and diagnostics”.
Refer to the index entry ”Warnings”.
5 Description of the Functions
02.9904.0108.06

Siemens SIMODRIVE POSMO A Specifications

General

Brand	Siemens
Model	SIMODRIVE POSMO A
Category	Engine
Language	English