Siemens SIMODRIVE POSMO A User Manual

v
E Siemens AG 2013 All Rights Reserved
SIMODRIVE POSMO A User Manual (POS1) – 08/2013 Edition
The following should be observed when using this manual:
1. Help: The following help is available for the reader:
S Complete table of contents
S Header line (as orientation):
the main chapter is in the upper header line
the sub–chapter is in the lower header line
S Appendix with
– Abbreviations and List of References
– Index
If you require information on a specific term, look in the Appendix
under ”Index” for this term.
The Chapter number as well as the page number is specified
where information on this term can be found.
2. Identifying ”new” or ”revised” information
The documentation 02.99 edition is the first edition.
How is the ”new” or ”revised” information identified for the other editions?
S This is specified directly next to the information ”from SW x.y”.
S The edition is in the header line on the respective page > 02.99.
3. Notation
S 8 means ”corresponds to”
S Numerical representation (examples)
– FFFF
hex
Hexadecimal number
– 0101
bin
Binary number
– 100
dec
Decimal number
S PROFIBUS signals (examples)
– STW.3 Control word bit 3
– ZSW.11 Status word bit 11
S Parameter (examples)
– P10 Parameter 10 without index
– P82:28 Parameter 82 with index 0, 1, ... 27 (28 indices)
– P82:13 Parameter 82 with index 13
– P82:x Parameter with undefined index x
– P56.2 Parameter 56 bit 2
Information about
using this manual
Foreword
06.05

Siemens SIMODRIVE POSMO A Specifications

General

Brand	Siemens
Model	SIMODRIVE POSMO A
Category	Engine
Language	English