Siemens SIMOTION Equipment Manual

Available Z options / licenses
The following Z options are available for SIMOTION D410-2:
Table 2-6 Z options / licenses available for the SIMOTION D410-2
Designation Z option / license Example
TControl temperature
control
Txx - TControl license and number T03 = three TControl licenses
SIMOTION IT J00 - SIMOTION IT Virtual Machine license for Java applica‐
tions
J00
Safety functions Fxx - SINAMICS Safety Integrated Extended Functions li‐
cense, speci󹪝cation of the number
Lxx - SINAMICS Safety Integrated Advanced Functions li‐
cense, speci󹪝cation of the number
The Safety Integrated Advanced Functions also include the
Safety Integrated Extended Functions.
F01 = one license for one drive with
Safety Integrated Extended Functions
L01 = one license for one drive with
Safety Integrated Advanced Functions
High output frequen‐
cy
H00 - SINAMICS high output frequency for SIMOTION D li‐
cense
H00
Axis licenses
• Pxx - POS license and number
• Gxx - GEAR license and number
• Cxx - CAM license and number
• P02 = two POS licenses
• G03 = three GEAR licenses
• C01 = one CAM license
MultiAxes package M41 - MultiAxes package license for SIMOTION D410-2
MIIF B02 - Multipurpose Information Interface B02
VIBX B03 - Vibration Extinction
(vibration damping of axes)
B03
OACAMGEN B04 - Cam generation
Motion pro󹪝les for servo presses
B04
LECo B07 - Learning Error Compensation
Compensation of cyclic errors from the production process
B07
Note
Path interpolation is supported as of V4.4.
SINAMICS licenses
Selected SINAMICS licenses can be used with a SIMOTION D CF card. Only one relicensing is
possible. A prelicensing of SIMOTION D CF cards via Z options is not possible with SINAMICS
licenses.
Description
2.7 CompactFlash card
SIMOTION D410-2
Equipment Manual, 07/2021, A5E33446720B 35

Siemens SIMOTION Specifications

General

Power Supply	24 V DC
Interfaces	PROFIBUS, PROFINET, Ethernet
Product type	Control Unit
Series	SIMOTION D
Display Output	VGA