Siemens SINAMICS G110M - SINAMICS G110 M Converter

Description
2.2 SINAMICS G110M converter
Distributed converter for SIMOGEAR geared motors
18 Getting Started, 04/2018, FW V4.7 SP10, A5E36100338B AG
2.2
SINAMICS G110M converter
Overview
The SINAMICS G110M system consists of the following components:
Terminal Hous-
ing (TH)
The TH acts as the connection between the G110M
and the motor. The TH replaces the normal motor
terminal box.
The TH contains the following components:
Communications and Power
Interface (CPI)
The CPI provides all the
input and outputs con-
nections for the convert-
er. In addition it allows
for the provision of an
optional external 24 V
power supply.
Control Module (CM)
The CM interfaces with
the CPI and the con-
verter to provide all the
command and control
functions of the convert-
er.
Power Module
(PM)
The PM provides the power to the converter and
through the DC link provides power to the low voltage
circuits in the CM and the PM.
Three-phase
motor
The SINAMICS G110M is designed for mounting on
the SIMOGEAR geered motors. It is compatible with
motors of frame sizes 71 to 112.