Siemens SINAMICS G110M - Page 21

Description
2.2 SINAMICS G110M converter
Distributed converter for SIMOGEAR geared motors
Getting Started, 04/2018, FW V4.7 SP10, A5E36100338B AG
19
The Power Modules are designed for a specific power range and the Terminal Housings are
designed to work with specific motors. The Terminal Housing not only allows the direct
mounting onto a motor but specific cable glands and mains connectors are specified. All the
various combinations of Power Modules, Terminal Housings (including the Control Modules)
and Options are given in the tables below.
CAUTION
Converter has the potential to start running of a PLC power-cycle
The converter has the potential to start running after a power-cycle of the controlling PLC, if
an ON command was present prior to the power-cycle of the PLC.
It is the users responsibility to ensure that the converter runs only when it is appropriate of
the user's application.
Table 2- 1 PM240M Power Modules - 3AC, 400 V, Class A, IP66
Frame size
Rated output power
(kW)
Rated output current
(A)
Article number
based on High Overload (HO)
FSA
0.37
1.3
6SL3517-1BE11-3AM0
FSA
0.75
2.2
6SL3517-1BE12-3AM0
FSA
1.1
3.1
6SL3517-1BE13-3AM0
FSA
1.5
4.1
6SL3517-1BE14-3AM0
FSB
2.2
5.6
6SL3517-1BE16-3AM0
FSB
3.0
7.3
6SL3517-1BE17-7AM0
FSB
4.0
8.8
6SL3517-1BE21-0AM0
Table 2- 2 CU240M Terminal Housing (including the Control Module)
Communications
Motor frame size
Mains / 24 V DC
connections
Article number
USS
FS71
Cable glands
6SL3544-0LB02-1BA0
USS
FS80/90
Cable glands
6SL3544-0MB02-1BA0
USS FS100/112 Cable glands 6SL3544-0NB02-1BA0
PROFIBUS
FS71
Cable glands
6SL3544-0LB02-1PA0
PROFIBUS FS80/90 Cable glands 6SL3544-0MB02-1PA0
PROFIBUS
FS100/112
Cable glands
6SL3544-0NB02-1PA0
PROFIBUS
FS71
HanQ 4/2 / 7/8"
6SL3544-0TB02-1PA0
PROFIBUS
FS80/90
HanQ 4/2 / 7/8"
6SL3544-0PB02-1PA0
PROFIBUS
FS100/112
HanQ 4/2 / 7/8"
6SL3544-0QB02-1PA0
PROFINET
FS71
Cable glands
6SL3544-0LB02-1FA0
PROFINET
FS80/90
Cable glands
6SL3544-0MB02-1FA0
PROFINET
FS100/112
Cable glands
6SL3544-0NB02-1FA0