Siemens SINAMICS G120C PN - Signal filter for STO selection

8.16.4.3 Con󹪝guring a safety function
Overview
You must enable the STO safety function and de󹪝ne how STO is selected.
Function description
Procedure
1. Select "Select safety functionality".

2. Select "Basic Functions".

3. Select "Control type/safety functions".


4. Select "Via terminals" as control type for the safety functions.
You have con󹪝gured the safety functions.
❒
Additional safety function con󹪝gurations are described in the "Safety Integrated" Function
Manual.
Overview of the manuals (Page465)
Advanced commissioning
8.16Safe Torque O󹪜 (STO) safety function
SINAMICS G120C Converters
260 Operating Instructions, 02/2023, FW V4.7 SP14, A5E34263257B AK