Siemens SINAMICS G120C PN User Manual

SINAMICS
SINAMICS G120C
SINAMICS G120C Converters
Operating Instructions
Edition 02/2023, Firmware 4.7 SP14
02/2023, FW V4.7 SP14
A5E34263257B AK
Changes in the current
edition
Fundamental safety
instructions
1
Introduction
2
Description
3
Installing
4
Commissioning
5
Uploading the converter
settings
6
Protecting the converter
settings
7
Advanced commissioning
8
Alarms, faults and system
messages
9
Corrective maintenance
10
Technical data
11
Appendix
A

Siemens SINAMICS G120C PN Specifications

General

Power range	0.55 kW to 132 kW
Control type	Vector control, V/f control
Protection class	IP20
Ambient temperature range	-10 °C to +50 °C
Product type designation	SINAMICS G120C
Integrated Safety	STO (Safe Torque Off)
Operating Temperature	-10 °C to +50 °C
Storage temperature range	-40 °C to +70 °C
Communication interfaces	PROFINET
Output voltage range	0 V to input voltage
Overload Capacity	150% for 60 s
Relative humidity	5% to 95%, non-condensing
Altitude	Up to 2000 m without derating