Siemens SINAMICS G120C PN User Manual

Parameter
Parameter Description Factory setting
r0025 CO: Output voltage, smoothed - Vrms
r0066 CO: Output frequency - Hz
r0071 Output voltage, maximum - Vrms
p0304[M] Rated motor voltage 0Vrms
p0310[M] Rated motor frequency 0Hz
p1300[D] Open-loop/closed-loop control operating mode 0
p1333[D] U/f control FCC starting frequency 0Hz
p1334[D] U/f control slip compensation starting frequency 0Hz
p1335[D] Slip compensation scaling 0%
p1338[D] U/f mode resonance damping gain 0
Advanced commissioning
8.20Motor control
SINAMICS G120C Converters
Operating Instructions, 02/2023, FW V4.7 SP14, A5E34263257B AK 303

Siemens SINAMICS G120C PN Specifications

General

Power range	0.55 kW to 132 kW
Control type	Vector control, V/f control
Protection class	IP20
Ambient temperature range	-10 °C to +50 °C
Product type designation	SINAMICS G120C
Integrated Safety	STO (Safe Torque Off)
Operating Temperature	-10 °C to +50 °C
Storage temperature range	-40 °C to +70 °C
Communication interfaces	PROFINET
Output voltage range	0 V to input voltage
Overload Capacity	150% for 60 s
Relative humidity	5% to 95%, non-condensing
Altitude	Up to 2000 m without derating