Siemens SINAMICS G120C PN User Manual

→ If you use the internal 10 V power supply, you must connect AI0- or AI1- to GND.
Further wiring options of digital inputs for FSD…FSF
*1'
H[W
9
H[W
 '2326
 '21(*
 ',&20









9RXW
 *1'
 ',&20
 ',
 ',
 ',
 ',
 ',
 ',
'212
 '2&20


'21&
;
;
;
;
Connection of contacts switching to P potential with an
external power source


If you wish to connect the external
and the internal converter power sup‐
ply voltages with one another, then
you must connect "GND" with termi‐
nals 34 and 69 at the terminals.


*1'
H[W
9
H[W
 '2326
 '21(*



9RXW
 *1'
 ',&20
 ',
 ',
 ',
 ',
 ',
 ',
'212
 '2&20


'21&
;
;

',&20




;


;
Connection of contacts switching to N potential with an
external power source


Connect terminals 69 and 34 at the
terminals.

Installing
4.10Connecting the interfaces for the converter control
SINAMICS G120C Converters
88 Operating Instructions, 02/2023, FW V4.7 SP14, A5E34263257B AK

Siemens SINAMICS G120C PN Specifications

General

Power range	0.55 kW to 132 kW
Control type	Vector control, V/f control
Protection class	IP20
Ambient temperature range	-10 °C to +50 °C
Product type designation	SINAMICS G120C
Integrated Safety	STO (Safe Torque Off)
Operating Temperature	-10 °C to +50 °C
Storage temperature range	-40 °C to +70 °C
Communication interfaces	PROFINET
Output voltage range	0 V to input voltage
Overload Capacity	150% for 60 s
Relative humidity	5% to 95%, non-condensing
Altitude	Up to 2000 m without derating