Siemens SINAMICS Intelligent Operator Panel User Manual

Menu
6.3 Parameters
Intelligent Operator Panel (IOP)
62 Operating Instructions, 08/2015, FW V1.6.1, A5E00110011B AF
6.3
Parameters
Parameter menu
Note
IOP functional support
The actual menu s
tructure and functionality of the IOP will be influenced by the following
factors:
•
The software version and type of Control Unit to which the IOP is fitted.
•
The firmware and software version of the IOP.
•
The selected functional group filtering of the parameters.
When editing parameter or search values there is a choice to edit individual digits or an
entire value. With a long press of the Wheel
(>3 sec) it will toggle between the two different
value editin
g modes.
The parameter menu allows the user extensive functionality
and access to all the Inverter parameters. When this option is
selected the user is given the opportunity to pe
rform parame-
ter orientated functions grouped in the following manner:
•
Parameter groups
•
Search by number
•
My parameters
•
Changed parameters
Note
SINAMICS S Drive Objects
The SINAMICS S range of Inverters deal with each component of the Inverter system as
unique and separate entities, these unique entities are called "drive objects" (DO). When
selecting "Parameters" from the Menu, there is an additional screen that requires
the
selection of the relevant DO before any parameters can be accessed. The default drive
object is always Servo (DO2). If you wish to access the parameter relating to the Control
Unit, the select "Control Unit (DO1)". See screenshot below.

Siemens SINAMICS Intelligent Operator Panel Specifications

General

Brand	Siemens
Model	SINAMICS Intelligent Operator Panel
Category	Control Panel
Language	English