Controlling the safety functions
5.4 Activating "SBC" via the Safe Brake Adapter
Safety Integrated
96 Function Manual, 08/2023, A5E03264275A
Table 5- 32 Terminal strip -X15, fast de-energization
Supply voltage: 230 V AC
Current consumption: 2 A
Max. connectable cross-section 2.5 mm
2
Spare fuse
The type of spare fuse is as follows: 2 A, time-lag.
Note
Correctly mounting the housing cover after replacing a fuse
An adhesive label is provided on the housing cover indicating the position of the connector.
Mount the cover in the correct position so that the inscription of the label matches the actual
connectors.
Mounting
The Safe Brake Adapter is designed for mounting on a rail according to IEC 60715.
The dimensions are shown in the following dimension drawing.
Figure 5-11 Dimension drawing of the Safe Brake Adapter (data in mm)
To Next Page
Loading...
