Siemens SINAMICS S200 - Connecting to the Fieldbus - X150; Block Diagram

SINAMICS S200 PROFINET servo drive system with SIMOTICS S-1FL2
22 A5E52388930A AA, 07/2023
4.4.10 Connecting to the fieldbus - X150
X150
Pin
Designation
Technical data
1
TXP
Transmit data +
2
TXN
Transmit data -
3
RXP
Receive data +
4
Reserved
Reserved
5
Reserved
Reserved
6
RXN
Receive data -
7
Reserved
Reserved
8
Reserved
Reserved
4.5 Block diagram
*
The interfaces X131 and X108 are available on the SINAMICS S200 converter only.
Figure 4-1 Connection example for converters with 3 AC line connection