SINAMICS S200 PROFINET servo drive system with SIMOTICS S-1FL2
A5E52388930A AA, 07/2023
7
3.1.3 Minimum clearance
Observe the following minimum mounting clearances. For converters without built-in fans, install cooling fans above the
converters for sufficient heat dissipation.
All dimensions are specified in millimeters.
Minimum lateral clearance (A) between multiple converters:
• 200 V converter: 1 mm
• 400 V converter: 10 mm
• A mixture of 200 V and 400 V converters: 10 mm
To Next Page
Loading...
