Siemens SINAMICS S200 - Technical Data of the 1 FL2 Motor; Technical Data of the MOTION-CONNECT Cables

SINAMICS S200 PROFINET servo drive system with SIMOTICS S-1FL2
A5E52388930A AA, 07/2023
5
2.2 Technical data of the 1FL2 motor
Property
Description
Cooling
Natural cooling
Type of construction according to
IEC/EN 60034-7
IM B5 (IM V1, IM V3)
Degree of protection according to
IEC/EN 60034-5
• 1FL2102, 1FL2☐03, 1FL2104, 1FL2204:
IP54 for the shaft extension (without shaft sealing) and IP65 for the
motor body, optionally IP65 for the whole motor (with shaft sealing)
• 1FL2☐05, 1FL23☐☐: IP65
Temperature monitoring
Thermal motor model
Paint finish
Anthracite (614 Anthrazit)
Shaft extension according to DIN 748-3 and
IEC 60072-1
Plain shaft, optionally shaft with feather key (half-key balancing)
Radial eccentricity, concentricity, and axial
eccentricity according to DIN 42955 and
IEC 60072-1
Tolerance N (normal)
Encoder
• Absolute encoder single-turn, 17-bit
• Absolute encoder single-turn, 21-bit
• Absolute encoder, 21-bit single-turn + 12-bit multiturn
Connection
• 1FL2102, 1FL2☐03, 1FL2104, 1FL2204: dual-cable connections with a
hybrid connector
• 1FL2☐05: two-cable connections with two angular connectors
• 1FL23☐☐: three-cable connections with three angular connectors
Mechanical environmental conditions during
operation
• Vibration severity grade: A (according to IEC 60034-14:2003)
• Shock resistance (m/s
2
):
– 1FL2102, 1FL2☐03, 1FL2104, 1FL2204, 1FL2☐05: 50 (continuous
in axial direction), 50 (continuous in radial direction), 300 (in a
short time of 11 ms)
– 1FL23☐☐: 25 (continuous in axial direction), 50 (continuous in
radial direction), 300 (in a short time of 11 ms)
Operating temperature
-15 °C ... +40 °C, power derating at higher temperatures
Relative humidity
< 90% at 30 °C, condensation not permissible
Installation altitude according to EN 60034-6
≤ 1000 m above sea level; otherwise power derating
Directives and standards
CE, cULus, UKCA, EAC, REACH, ISO 9001, ISO 14001, China RoHS,
China Energy Label Grade 2
2.3 Technical data of the MOTION-CONNECT cables
Property
Power cable
Encoder cable
Brake cable
Rated voltage U
0
/U (V)
• 200 V converters: 300/1000
• 400 V converters: 600/1000
30/300
30/300
Number of conductors
• With brake conductors: 6
• Without brake conductors: 4
6
2
Outer diameter (mm)
• For 1FL2 SH20 ... SH65: ø (7.5 ± 0.2)
• For 1FL2 SH90:
– 2.5 kW: ø (7.8 ± 0.3)
– 3.5 kW ... 7 kW: ø (9 ± 0.3)
ø (7 ± 0.2)
ø (6 ± 0.2)
Minimum bending radius,
static (mm)
4 x outer diameter
4 x outer diameter
4 x outer diameter
Minimum bending radius,
dynamic (mm)
7.5 x outer diameter
7.5 x outer diameter
7.5 x outer diameter
Operating temperature (°C)
-20 ... +80
Shielding
Braided shield; coverage ≥ 85%
Degree of protection
IP65
Jacket material
• MOTION-CONNECT 350: PVC
• MOTION-CONNECT 380: PUR
Bending cycles
• MOTION-CONNECT 350: 1 million
• MOTION-CONNECT 380: 5 million
Directives and standards
CE, cULus, UKCA, EAC, ISO 9001, ISO 14001, China RoHS