Siemens SINAMICS S200 - Safety Notes; Technical Data; Technical Data of the Converter; Permissible Climatic Conditions for the Converter

SINAMICS S200 PROFINET servo drive system with SIMOTICS S-1FL2
A5E52388930A AA, 07/2023
3
1 Safety notes
DANGER
Danger to life if the safety instructions and operating instructions are not observed
The compact operating instructions only contain the most important information for operating the converter. If the safety
instructions and operating instructions in the associated documentation are not observed, accidents involving severe
injuries or death can occur.
• Observe the safety instructions and operating instructions given in the associated documentation.
2 Technical data
2.1 Technical data of the converter
2.1.1 Permissible climatic conditions for the converter
Feature
Usage phase
Long-term storage
Transport
Operation
Climatic
environmental
conditions
Surrounding
air
temperature
-40 °C ... +70 °C
-40 °C ... +70 °C
0 °C ... 55 °C, > 45 °C with
power derating
Humidity
≤ 95%, condensation not
permissible
≤ 95% at 45 °C
≤ 95%, condensation not
permissible
Mechanical
environmental
conditions
Vibration
Class 1M2 according to
IEC 60721-3-1
Class 2M3 according to
IEC 60721-3-2
• 2 Hz to 9 Hz: 7.5 mm
deflection
• 9 Hz to 200 Hz: 2 g
vibration
Class 3M1 according to
IEC 60721-3-3
• 10 Hz to 58 Hz: 0.075 mm
deflection
• 58 Hz to 200 Hz: 1 g
vibration
Shock
-
-
Class 3M1 according to
IEC 60721-3-3
• Peak acceleration: 5 g
• Duration of shock: 30 ms
Biological environmental
conditions
Class 1B2 according to
IEC 60721-3-1
Class 2B2 according to
IEC 60721-3-2
Class 3B1 according to
IEC 60721-3-3
Protection against chemical
substances
Class 1C2 according to
IEC 60721-3-1
Class 2C2 according to
IEC 60721-3-2
Class 3C2 according to
IEC 60721-3-3