SINAMICS S200 PROFINET servo drive system with SIMOTICS S-1FL2
26 A5E52388930A AA, 07/2023
Menu and functions
Commissioning You can perform quick setup and optimization.
You can view faults and alarms including information concerning causes and
remedies in the menu "Diagnostics > Messages".
You can view the current status of the converter and the inputs and outputs.
Parameter Further adjustments can be made by selecting the menu item "Parameter".
Backup and restore You can save drive data to backup file, restore drive data from backup file, and
restore factory settings.
You can configure the basic settings for the web server and the converter.
Control panel The function controls the motor without the higher-level controller. You can use
this function for purposes such as testing the converter settings after
commissioning.
To Next Page
Loading...
