Siemens SINAMICS V20 - 1 Task; Overview; Operation of the Drive

1 Task
1.1 Overview
SINAMICS V20 at S7-1200/1500 via USS
Entry ID: 109480894, V1.0, 09/2018
4
 Siemens AG 2018 All rights reserved
1 Task
1.1 Overview
The SINAMICS V20 drives are to be controlled by a SIMATIC S7-1200 or S7-1500
via the RS485 interface and using USS® (Universal Serial Interface protocol). The
supplied sample projects show the configuration and programming of the controller
for a USS
®
bus with a SINAMICS V20 drive.
Figure 1-1: Schematic representation
…
USS bus
®
S7-1200
S7-1500
SINAMICS V20
SINAMICS V20 SINAMICS V20
SIMATIC
1.2 Operation of the drive
In the example, the drive is operated in the following ways:
 Watch table in TIA Portal
 KTP600 operator panel in TIA Portal