Siemens SINAMICS V20 - Configuring the SIMATIC HMI KTP600 Operator Panel

4 Configuration and Project Engineering
4.3 Configuring the SIMATIC HMI KTP600 operator panel
SINAMICS V20 at S7-1200/1500 via USS
Entry ID: 109480894, V1.0, 09/2018
24
 Siemens AG 2018 All rights reserved
4.3 Configuring the SIMATIC HMI KTP600 operator panel
Table 4-3: Table for configuring the SIMATIC HMI KTP600 operator panel
No.
Action
1.
In the project tree, go to Devices & networks and select the Network view. In the Hardware catalog
task card, locate the SIMATIC Basic Panel KTP600 Basic and use drag and drop to move it to the
graphic area of the Network view. In this area, it will be created as HMI_1
7
. Select the panel with a
version ≥V12.0.0.0.
7
Name can be changed.