4 Configuration and Project Engineering
4.3 Configuring the SIMATIC HMI KTP600 operator panel
SINAMICS V20 at S7-1200/1500 via USS
Entry ID: 109480894, V1.0, 09/2018
Siemens AG 2018 All rights reserved
Alternatively, you can also copy the fully configured operator panel from the supplied sample
project to your new project. For the copy operation, you can open both TIA projects at the same
time and use drag and drop to move the HMI device via from the graphic area of the Network view
of the source project to the one of the target project.
Continue with step 3, provided that you have newly added the HMI device from the catalog. If you
have added the HMI device by copying it, you have to delete the old connection.
To Next Page
Loading...
