Siemens SINAMICS V20 - Hardware and Software Components; Validity; Components Used

2 Solution
2.2 Hardware and software components
SINAMICS V20 at S7-1200/1500 via USS
Entry ID: 109480894, V1.0, 09/2018
7
 Siemens AG 2018 All rights reserved
Required knowledge
Knowledge of automation and drive technology is helpful to understand the
application example. You need basic knowledge of SINAMICS drives and
configuring SIMATIC controllers in TIA Portal.
2.2 Hardware and software components
2.2.1 Validity
This application is valid for
 SINAMICS V20 with the following firmware version data or higher:
Table 2-1: SINAMICS V20 firmware version data
Parameter
Index
Meaning
Value
r0018
-
Firmware version
3.51
r0964
[0]
Company (Siemens = 42)
42
[1]
Product type (V20 = 8001)
8001
[2]
Firmware version
351
[3]
Firmware date (year)
2012
[4]
Firmware date (day/month)
1012
[5]
Number of inverters
1
[6]
Firmware version
500
 S7-1200 PLC with firmware V4.1 or higher
1
 S7-1200 CM1241 communication module with firmware V2.1 or higher
 S7-1200 CB1241 communication board with firmware V1.0 or higher
 S7-1500 controller with firmware V1.7 or higher
 S7-1500 CM PtP communication module with firmware V1.0 or higher
 STEP 7 software V13 SP1 or higher
2.2.2 Components used
The application was created with the following components.
Hardware components
The following table contains only the main components necessary from a functional
perspective. It does not list
 line-side components such as circuit-breakers, fuses or line filters.
 load-dependent components such as braking resistors.
 fixing accessories such as mounting rails.
 standard wiring material and terminal blocks.
 other small accessories.
1
Please note: An update to ≥V4.1 is only possible for S7-1200 controllers with article numbers
…….-1xx40-….