Siemens Sinumerik 840 sl Function Manual

Detailed Description
2.4 Acceleration (B2)
Basic logic functions: NC/PLC interface signals (Z1)
70 Function Manual, 11/2006, 6FC5397-0BP10-2BA0
DB31, ...
DBX60.7
Position reached with exact stop fine
Edge evaluation: no Signal(s) updated: cyclic
Signal state 1 or
edge change
0 → 1
Refer to DB31, ... DBX60.6 (position reached with exact stop coarse).
Signal state 0 or
edge change
1 → 0
Refer to DB31, ... DBX60.6 (position reached with exact stop coarse).
Signal irrelevant for
...
Rotary axes that are programmed as rounding axes.
Corresponding to .... MD36010 $MA_STOP_LIMIT_FINE (exact stop fine)
2.4 Acceleration (B2)
No signal descriptions required.
2.5 Diagnostic tools (D1)
No signal descriptions required.

Siemens Sinumerik 840 sl Specifications

General

Brand	Siemens
Model	Sinumerik 840 sl
Category	Control Unit
Language	English