Preface
eP-Satellite server
4 Operating Instructions, 06/2009
Standard scope
This documentation only describes the functionality of the standard version. Additions or
revisions made by the machine manufacturer are documented by the machine manufacturer.
Other functions not described in this documentation might be executable in the control. This
does not, however, represent an obligation to supply such functions with a new control or
when servicing.
For the sake of simplicity, this documentation does not contain all detailed information about
all types of the product and cannot cover every conceivable case of installation, operation, or
maintenance.
Questions about the manual
If you have any queries (suggestions, corrections) in relation to this documentation, please
fax or e-mail us:
Fax +49 (0) 9131 98 2176
E-mail docu.motioncontrol@siemens.com
A fax form is available at the end of this document.
Service & Support
If you have any technical questions, please contact our hotline:
Europe / Africa
Phone +49 (0) 180 5050 222
Fax +49 (0) 180 5050 223
€0.14/min from the German fixed-line network; cell phone charges may vary.
Internet http://www.siemens.com/automation/support-request
America
Phone +1 (0) 423 262 2522
Fax +1 (0) 423 262 2200
E-mail techsupport.sea@siemens.com
Asia/Pacific
Phone +86 (0) 1064 75 75 75
Fax +86 (0) 1064 74 74 74
E-mail support.asia.automation@siemens.com
To Next Page
Loading...
Need help?
General
