Siemens SINUMERIK 840D sl Operating Instructions

Release management - Updating the eP-Satellite server
5.4 BC run of version 4.7.0 on version 4.7.1
eP-Satellite server
Operating Instructions, 06/2009
95
Once the online Business Converter has finished, you can move on to the next installation
step.
Locking organizations
Since the Business Converter call "/ALLOFFLINE" temporarily unlocks all locked
organizations, these organizations need to be locked again. The call looks like this:
Command line:
ePS.Business.Converter.exe
/RESETTEMPORARILYUNLOCKEDORGANIZATIONS
Additional settings in the web.config file
The following settings can be made in file web.config of folder
C:\eps_services\Services\Version4:
<add key="zipBigStoreData" value="true"/>
If this parameter is set to true" (default setting), this means that newly uploaded data on the
web server will be compressed before it is stored in the database. If it is set to "false" the
data will be stored without being compressed.
While the BC is running, the following entry can be used to reactivate the old display for the
NC monitors:
Command line:
<condMon>
<NcMonitor configEnabled="false" timeseriesValuesEnabled="true">
</NcMonitor>
</condMon>

Siemens SINUMERIK 840D sl Specifications

General

Control Type	CNC
Number of Axes	Up to 31
Max Number of Channels	10
Interfaces	Ethernet, PROFIBUS, PROFINET, USB
Interpolation	5-axis interpolation
Operating Temperature	0°C to 45°C
Relative Humidity	Up to 95% (non-condensing)
Display	TFT color display, various sizes
Programming Languages	DIN/ISO
Safety Features	Safety Integrated
PLC	Integrated PLC S7-300
Drive Interface	SINAMICS S120
Data Storage	CF card, USB
Operating System	Windows-based