Configuration
50
7SS52 V4 Manual
C53000-G1176-C182-3
4.3.2 Starting the Plant Configuration
To start the DIGSI Plant configuration you must:
 Select the central unit 7SS522 in the project window of DIGSI Manager and open
the context menu via right mouse click. Apply the command Open object. The
Open device dialog box opens. You can also open the dialog box by double-click-
ing the central unit 7SS522.
Figure 4-4 Open Device dialog box
 Select the connection type and confirm with OK. The DIGSI Device Configuration
opens.
 Unfold the directory Settings in the function selection of the DIGSI Device Config-
uration and select the object Substation configuration.
Figure 4-5 Start screen of the DIGSI Device Configuration
 Right-click the object to open the context menu and apply the command
Open object. The DIGSI Plant Configuration opens. You can also open the DIGSI
Plant Configuration by double-clicking the object Substation configuration.
www . ElectricalPartManuals . com
To Next Page
Loading...
Need help?
General
