SIREMOBIL Compact Register 3 SPR2-130.033.02 Page 6 of 6 Siemens AG
System Manual Rev. 02 12.98 TD SD 24 Medical Engineering
2 - 6 Removing the lifting column
2
Removing the control lever with the gears 2
• Turn the control lever parallel to the unit.
• Knock the spring pin out of the steering linkage (2/Fig.14).
• Mark the position of the control lever with a felt pen.
• Disconnect the control lever unit and remove it (3/Fig.14).
Removing the lifting column 2
• Remove the four mounting screws of the lifting column from the underside of the unit;
tilt the unit a little, if necessary.
• Remove the lifting column (two people required).
Be careful not to damage the connection cable.
Fig. 14
To Next Page
Loading...
