Siemens SIREMOBIL Compact - Line Voltage Adjustment; Checking Line Voltage on Monitor Trolley

Installing the lifting column 3 - 5
Siemens AG Register 3 SPR2-130.033.02 Page 5 of 10 SIREMOBIL Compact
Medical Engineering Rev. 02 12.98 TD SD 24 System Manual
Installing the C-arm and the swivel brake 3
• Place the new collar over the lifting column, center it and attach it securely.
• Place the C-arm back into the mounting (3 people required).
• Reinstall the swivel brake:
- Insert the bolt from below through the latches.
- Reinstall the spring pin with its opening facing you.
• Install the spring washers:
the lower spring with the cone upward; the upper spring with the cone downward.
• Secure the latch assembly with the screws.
• Position the brake lever.
• Secure the cover plate with the screws under the swivel brake.
• Reattach the hand railing to the C-arm with the screws.