20 Mechanical system
SIREMOBIL Iso-C 3D SPR2-230.814.03.02.02 Siemens AG
11.05 CS SD 24
Page 20 of 52
Medical Solutions
Fig. 7: I.I._4
NOTE
The new grid holder has a protruding pin. The grid must be insert-
ed and glued in with its label toward the pin. The new grid holder
must be installed with its pin toward the end of the c-arm.
• Wait for the silicone to harden (approx. 30 min).
• Attach the grid holder to the I.I. and secure it with screws (11 22 571) and contact wash-
ers (34 16 66)6.
To Next Page
Loading...
