Siemens SIREMOBIL Iso-C 3D - Positioning; Systems Equipped with a Laser Light Localizer

Siemens AG SPR2-230.814.03.02.02 SIREMOBIL Iso-C 3D
11.05 CS SD 24
Adjusting the calibration phantom 29
Page 29 of 52
Medical Solutions
6-
5Adjusting the calibration phantom
Positioning 0
• Take the stand out of the "Calibration Phantom Service Case".
• Attach the calibration phantom to the stand.
Systems equipped with a laser light localizer 0
• Position the calibration phantom in the C-arm.
Fig. 14: Navigation_calibration_phantom
• Using the light laser localizer, align the C-arm correctly with respect to the markings on
the calibration phantom, first in the vertical and then in the horizontal C-arm position.