Siemens SIREMOBIL Iso-C 3D - Navigation DICOM Nodes

26 License and configuration
SIREMOBIL Iso-C 3D SPR2-230.814.03.02.02 Siemens AG
11.05 CS SD 24
Page 26 of 52
Medical Solutions
Navigation DICOM nodes 0
A default DICOM node will now be configured for the navigation system.
This may be changed in consultation with the navigation systems vendor.
• Open syngo service software
• Click "Configuration".
• Click "Next".
• Under "DICOM", select "Network nodes".
Fig. 12: Network_Navigation_1
• Under "Select host", select "Define new".
Host properties
• Under "Host name" enter "Navi".
• Under TCP/IP address enter "192.17.3.111".
• Click "Save".
¹ The following is displayed: "Host properties successfully saved".
• Click "OK".
• Select ">".