Siemens AG SPR2-230.814.03.02.02 SIREMOBIL Iso-C 3D
11.05 CS SD 24
BrainLAB navigation system 37
Page 37 of 52
Medical Solutions
Testing procedure 0
• Press the key combination "Ctrl-D" on the MEMOSKOP keyboard to switch over to 3D
operation.
¹ syngo screen appears on right-hand monitor
Fig. 24: syngo_start_screen
• Select the 3D task card
• Click “Acquisition ISO-C 3D”.
- This is the button with the two C-arms and the figure in the middle, in the upper right
button block.
To Next Page
Loading...
