24 License and configuration
SIREMOBIL Iso-C 3D SPR2-230.814.03.02.02 Siemens AG
11.05 CS SD 24
Page 24 of 52
Medical Solutions
DICOM Configuration 0
System network configuration 0
What follows is a check to see whether the system already has a network configuration.
Service software not opened
• Open syngo service software
• Click "Configuration".
Fig. 11: LocalHost_TCPIP
Service software opened
• Select "TCP/IP LAN” under "Local host”
Check IP address
• Click the selection window under "IP address".
• If the IP address 192.168.1.1 appears, delete it.
To Next Page
Loading...
