Siemens SIREMOBIL Iso-C 3D - Licensing; Loading the License

22 License and configuration
SIREMOBIL Iso-C 3D SPR2-230.814.03.02.02 Siemens AG
11.05 CS SD 24
Page 22 of 52
Medical Solutions
5-
4License and configuration
Licensing 0
Loading the license 0
• After system start-up, press the key combination "Ctrl-D" on the MEMOSKOP key-
board to switch over to 3D operation.
¹ syngo screen appears on right-hand monitor
• Open syngo service software
Fig. 9: Service Software Home Menu
• Click "Configuration".
• Click "Next".