Siemens SIREMOBIL Iso-C 3D - Page 27

Siemens AG SPR2-230.814.03.02.02 SIREMOBIL Iso-C 3D
11.05 CS SD 24
License and configuration 27
Page 27 of 52
Medical Solutions
Fig. 13: Network_Navigation_2
General Node Properties
• Under "Logical name", select "Define new".
• Under “Edit name”, enter “N_Navigation”.
NOTE
Only when the "Logical name" begins with "N_" does the naviga-
tion configuration appear in the calibration screen.
• Under "Host", select the name "Navi".
Application entity properties
• Under "AE title", select "Define new".
• Under “edit AE Title”, enter “NAVI_SCP”.
• Under “Port number ”, enter “104”
Supported DICOM services
• Select "Storage".
• Do not make any changes under "Storage".
• Click "Add".
• Click "Save".
¹ The following is displayed: "DICOM node properties successfully saved".
• Click "OK".