Functions
5.6 Functions of the outputs
SIRIUS 3RW30 / 3RW40
56 Manual, 10/2018, NEB535199502000/RS-AB/005
3RW40: Group fault output at terminal 95 / 96 / 98 OVERLOAD / FAILURE
If there is no rated control voltage or if a failure occurs, the potential-free FAILURE /
OVERLOAD output is switched.
For recommended circuits, refer to chapter Typical circuit diagrams (Page 161).
For a state diagram of the contacts in the various fault and operating states, refer to chapter
Messages and diagnosis (Page 57).
To Next Page
Loading...
