EasyManua.ls Logo

Siemens SIRIUS 3RW44 - Technical Data Power Electronics

Siemens SIRIUS 3RW44
153 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
General Technical Data
SIRIUS 3RW44 manual
GWA 4NEB 535 2195-02 DS 02
9-7
9.3.2 Technical Data Power Electronics
1) Current limit on soft starter set to 350 % I
M
.
2) For intermittent duty S4 with ON period = 70 %, T
u
= 40 °C, stand-alone installation vertical. The quoted
operating frequencies do not apply for automatic mode.
3) Maximum adjustable rated motor current I
M
, dependent on CLASS setting.
Type 3RW44 ..-.BC.4 3RW44 ..-.BC.5 3RW44 ..-.BC.6
Power electronics
Rated operational voltage for inline circuit V 200 ... 460 AC 400 ... 600 AC 400 ... 690 AC
Tolerance %
-15/+10 -15/+10 -15/+10
Rated operational voltage for inside-delta circuit V
200 ... 400 AC 400 ... 600 AC 400 ... 600 AC
Tolerance %
-15/+10 -15/+10 -15/+10
Rated frequency Hz
50 ... 60
Tolerance %
±10
Continuous operation at 40 °C (% of I
e
)%115
Minimum load (% of set motor current I
M
)%8
Maximum conductor length between soft starter and motor m
200
Permissible installation height m
4000 (derating from 1000); higher on request
Permissible mounting position
Permissible ambient temperature
Operation °C 0 ... +60; (derating from +40)
Storage °C
-25 ... +80
Degree of protection
IP00
NSB00649
22. 22.5°
90°90°
Type 3RW44 22 3RW44 23 3RW44 24 3RW44 25 3RW44 26 3RW44 27
Power electronics
Rated operational current I
e
29 36 47 57 77 93
Load rating with rated operational current I
e
Acc. to IEC and UL/CSA for individual mounting
at 40/50/60 °C, AC-53a A
29/26/23 36/32/29 47/42/37 57/51/45 77/68/59 93/82/72
Smallest adjustable operational current I
M
For the motor overload protection
A
5 7 9 11 15 18
Power loss
In operation after completed soft starting with uninterrupted rated
operational current (40 °C) approx. W
8 10 32 36 45 55
During starting with current limit set to 350 %
I
M
(40 °C) W 400 470 600 725 940 1160
Permissible rated motor current and starts per hour
Normal starting (Class 5)
- Rated motor current I
M
1)
, starting time 5 s A 29 36 47 57 77 93
- Starts per hour
2)
1/h 41 34 41 41 41 41
- Rated motor current
I
M
1)3)
, starting time 10 s A 29 36 47 57 77 93
- Starts per hour
2)
1/h 20 15 20 20 20 20
Normal starting (Class 10)
- Rated motor current I
M
1)
, starting time 10 s A 29 36 47 57 77 93
- Starts per hour
2)
1/h 20 15 20 20 20 20
- Rated motor current
I
M
1)3)
, starting time 20 s A 29 36 47 57 77 93
- Starts per hour
2)
1/h 10 6 10 10 8 8
Normal starting (Class 15)
- Rated motor current I
M
1)
, starting time 15 s A 29 36 47 57 77 93
- Starts per hour
2)
1/h 13 9 13 13 13 13
- Rated motor current
I
M
1)3)
, starting time 30 s A 29 36 47 57 77 93
- Starts per hour
2)
1/h 6 4 6 6 6 6
For heavy starting (Class 20)
- Rated motor current I
M
1)
, starting time 20 s A 29 36 47 57 73 88
- Starts per hour
2)
1/h 10 6 10 10 10 10
- Rated motor current
I
M
1)3)
, starting time 40 s A 29 36 47 57 73 88
- Starts per hour
2)
1/h 4 2 4 5 1.8 0.8
For very heavy starting (Class 30)
- Rated motor current I
M
1)
, starting time 30 s A 29 36 44 57 65 77
- Starts per hour
2)
1/h 6 4 6 6 6 6
- Rated motor current
I
M
1)3)
, starting time 60 s A 29 36 44 57 65 77
- Starts per hour
2)
1/h 1.8 0.8 3.3 1.5 2 1

Table of Contents

Other manuals for Siemens SIRIUS 3RW44

Related product manuals