Siemens SIRIUS - Disassembling an S0 Load Feeder with Spring-Loaded Connection System

Mounting
7.2 Mounting and disassembling load feeders
SIRIUS - SIRIUS 3RA load feeders
58 Manual, 09/2016, A5E03656507520A/RS-AB/003
Note
Contactor size S0 alternating current (AC)
S0
contactors with AC operation and spring-loaded connection system need a spacer (d) for
DIN rail or busbar adapter mounting.
Disassembling an S0 load feeder with spring-loaded connection system
1a Slide the screwdriver into the opening on the link module as shown in the figure and press it
down.
1b Position the screwdriver on the link module as shown in the figure and press it down to release
the spring-loaded terminals.
Figure 7-12 Disassembling an S0 load feeder with spring-loaded connection system