Mounting
7.3 Assembly and disassembly with different mounting systems
SIRIUS - SIRIUS 3RA load feeders
94 Manual, 09/2016, A5E03656507520A/RS-AB/003
Busbar adapters and device holders can be connected without tools. Link wedges simply
need to be plugged in on the rear of the adapters.
Figure 7-35 Connecting the adapters for mounting reversing contactor assemblies
The link wedges are included in the assembly kit for reversing operation, or they can be
ordered separately as accessories.
Adapting the busbar adapter to the busbar system
Will cause death or serious injury.
Turn off and lock out all power supplying this device before working on this device.
The busbar adapter and the device holder can be adjusted to suit the following busbar
thicknesses:
● 5 mm (delivery condition)
● 10 mm
To Next Page
Loading...
