Mounting
7.3 Assembly and disassembly with different mounting systems
SIRIUS - SIRIUS 3RA load feeders
Manual, 09/2016, A5E03656507520A/RS-AB/003
75
① Attach a connecting piece to each of the two DIN rail adapters. Insert each of the
connecting pieces into the left-hand line of holes.
② Snap the feeder onto the DIN rail adapter. Insert the tabs on the connecting pieces into
the fastening holes on the contactors.
③ Screw the feeder to the DIN rail adapter:
• Use two screw holders for the screw mounting.
• Attach a screw holder underneath each connecting piece, flush with the contactor's
mounting base.
• Screw the screw holder to the adapter.
The feeder sits tight on the adapter.
To Next Page
Loading...
