Siemens SITRANS F M MAG 5100 W - Technical Data; MAG 5100 W

SITRANS F M MAG 5100 W
Operating Instructions, 11/2010, A5E03063678-02
37
Technical data
8
8.1 MAG 5100 W
Table 8- 1 Technical data
Version MAG 5100W (7ME6520) MAG 5100W (7ME6580)
Product characteristic Mainly for the European market
EPDM or NBR lining
Mainly for the non-European market
Ebonite lining
Design and nominal size Coned sensor:
 DN 15 ... 300 (½" ... 12")
Full bore sensor:
 DN 350 ... 1200 (14" ... 48")
Full bore sensor:
 DN 25 ... 2000 (1" ... 78")
Measuring principle Electromagnetic induction
Excitation frequency
(Mains supply: 50 Hz/60 Hz)
DN 15 ... 65 (½" ... 2½"):
 12.5 Hz / 15 Hz
DN 80 ... 150 (3" ... 6"):
 6.25 Hz / 7.5 Hz
DN 200 ... 300 (8" ... 12"):
 3.125 Hz / 3.75 Hz
DN 350 ... 1200 (14" ... 48"):
 1.5625 Hz / 1.875 Hz
DN 25 ... 65 (1" ... 2½"):
 12.5 Hz / 15 Hz
DN 80 ... 150 (3" ... 6"):
 6.25 Hz / 7.5 Hz
DN 200 ... 1200 (8" ... 48"):
 3.125 Hz / 3.75 Hz
DN 1400 ... 2000 (54" ... 78"):
 1.5625 Hz / 1.875 Hz
Table 8- 2 Process connections
Version MAG 5100W (7ME6520) MAG 5100W (7ME6580)
EN 1092-1 PN 10 (145 psi):
 DN 200 ... 300 (8" ... 12")
Flat face flanges
PN 10 (145 psi):
 DN 350 ... 1200 (14" ... 48")
Raised face flanges
PN 16 (232 psi):
 DN 50 ... 300 (2" ... 12")
Flat face flanges
PN 16 (232 psi):
 DN 350 ... 1200 (14" ... 48")
Raised face flanges
PN 40 (580 psi):
 DN 15 ... 40 (½" ... 1½")
Flat face flanges
Raised face
(EN 1092-1, DIN 3501 and BS4504
have the same mating dimensions)
PN 16 (87 psi):
 DN 1400 ... 2000 (54" ... 78")
PN 10 (145 psi):
 DN 200 ... 2000 (8" ... 78")
PN16 (232 psi):
 DN 65 ... 600 (2½" ... 24")
PN 40 (580 psi):
 DN 25 ... 50 (1" ... 2")
ANSI B16.5 Class 150 lb: ½" ... 24" Class 150 lb: 1" ... 24"