Description
3
SITRANS F US ultrasonic flow meter systems consist of a transmitter and a sensor. The
following table lists the available combinations of transmitters and sensors.
Transmitter Sensor type
FST030 FSS200
DN 15 to DN 9000 (0.5" to 360")
3.1 Design
3.1.1 Transmitter
The transmitter reads the measured process values from the sensor and calculates derived
values. It provides up to five configurable I/Os, fieldbus communication MODBUS, USB service
channel, and a local display. It also adds functionalities such as totalizers, access control,
diagnostics, and configuration. The local user interface consists of a display and four buttons
for user interaction.
The transmitter has a modular design with discrete, replaceable electronic modules and
connection boards to maintain separation between functions and facilitate field service. All
modules are fully traceable and their provenance is included in the transmitter setup.
The SITRANS FST030 is available as:
Wall mount enclosure with internal DSL
3.2 Features
● The transmitter output can be connected via channel 1 to a Modbus fieldbus of a Process
Control System (for example SIEMENS SIMATIC S7/PCS7).
● Available as wall mount housing
● Full graphical local display
SITRANS FST030 (Modbus)
Operating Instructions, 08/2018, A5E37367739-AD 21
To Next Page
Loading...
