Siemens Sitrans F Series - Page 321

Channel 3 output current
Table A-122 Channel 3 output current
Modbus
register
Data type /
Size in bytes
Parameter Description Default value
[unit]
(unit register)
Value range /
Setting options
Access
level
9125 Unsigned / 2 Simulation Enables or disables
simulation of channel 3
output current.
0
● 0: Disabled
● 1: Enabled
Read /
write
9126 Float / 4 Simulated value Current value that is
output on the channel
when simulation is ena‐
bled.
0
[mA]
0 - 25 Read /
write
Channel 3 output status
Table A-123 Channel 3 output status
Modbus
register
Data type /
Size in bytes
Parameter Description Default value
[unit]
(unit register)
Value range /
Setting options
Access
level
9164 Unsigned / 2 Simulation Enables or disables
simulation of channel 3
output status.
0
● 0: Disabled
● 1: Enabled
Read /
write
9165 Unsigned / 2 Simulated value Signal level that is out‐
put on the channel
when simulation is ena‐
bled.
0 0, 1 Read /
write
Channel 3 output frequency
Table A-124 Channel 3 output frequency
Modbus
register
Data type /
Size in bytes
Parameter Description Default value
[unit]
(unit register)
Value range /
Setting options
Access
level
9205 Unsigned / 2 Simulation Enables or disables
simulation of channel 3
output frequency.
0
● 0: Disabled
● 1: Enabled
Read /
write
9206 Float / 4 Simulated value Frequency value that is
output on the channel
when simulation is ena‐
bled.
1.0
[Hz]
0.0 - 12500.0 Read /
write
Modbus communication
A.9 Modbus holding registers tables
SITRANS FST030 (Modbus)
Operating Instructions, 08/2018, A5E37367739-AD 321